Having an air-conditioned house with the most pleasant temperatures possible is a convenience that many people want. However, knowing how to install air conditioning is not such a simple task, and several factors need to be taken into account. After all, you need to be calm to make a good choice.
Provide The Proper Pipes For Installation
The first point to be noted is the materials needed for the installation process of the device. After all, it’s not just any type of material that can be used. It is necessary to have tubes made of copper or aluminum, for example, to support the thermal load of the device.
In addition, it is essential to use PVC pipes for the water drainage process, which must be connected to the residence’s network to avoid leaky pipes. When installing the air conditioning, it’s no use thinking about saving with a poor-quality material since, in the future, the inconvenience with maintenance and the financial losses can be even more significant.
Check The Ideal Electrical Wiring For Each Model.
To have a more modern house, it is necessary to make sure that the electrical wiring in the place is prepared to receive the air conditioning unit. Therefore, it is necessary to have a unique infrastructure. So, you should check, for example, if your house has a pipe with electrical wiring compatible with the appliance.
It needs to have cables dynamized with the specific voltage for the air conditioning that will be installed. It is also essential that there is a specific circuit breaker for each appliance. This way, you do not overload the electrical system and guarantee more safety, preventing future problems, including accidents.
Choose The Right Place To Put The Air Conditioner
Generally, the ideal place to attach the air conditioner is where the piping does not harm the electrical installations or the water and sewage pipes in your home. Also, it is not recommended to place the air outlet part on the walls, where the sun hits very often.
Another point to note during the device installation process is to make sure that the air outlet does not flow into electronic devices. In contact with evaporated water, they can be damaged or even start some accident in the place, such as a short circuit.
Avoid Places That Get Too Much Sun.
It is important to avoid installing the air conditioner on walls that get too much sun. The incidence of sunlight tends to overload the device, compromising its performance. This is because surface heating increases the local temperature, making the air conditioner work harder to ensure adequate cooling.
In addition to using up more energy, it harms your life. Rooms where windows receive direct sunlight, are also warmer. In smaller places, such as bedrooms, only a device with greater power can supply the cooling demand.
Consider The Architecture Of The Environment.
When installing the air conditioning, it is also interesting to pay attention to the environment’s architecture. The installation place must be free of decorative elements that could impede the air circulation that leaves the appliance, such as shelves, blinds, and curtains. For example, in living rooms, it is recommended that the air conditioning be installed above the sofa, while in the bedrooms, it is most recommended that it be installed above the bed.
For indoor units, it is essential that the structure, such as the plaster on the wall, support the weight of the evaporator and the vibrations of the appliance when it is turned on. In addition, the location must allow the installation of wiring and piping and provide easy removal of filters at the time of cleaning.
As for the placement of outdoor units, closed places such as laundries and bathrooms should be avoided. For correct operation, the device must be installed in a dry and ventilated place. In these cases, the structure must also support the vibration and weight of the air conditioner.